Availability: | |
---|---|
Quantity: | |
Introduction
Range of cutting edge diameter: D1-D25mm Range of full length: L=50-150mm
Fine-grained tungsten carbide parent material has high toughness and is covered with NACO nano-coating, which is wear-resistant.
Large-capacity chip removal, fast chip removal, not easy to stick to the knife to achieve high efficiency machining, workpiece high precision more glossy.
Dedicated to CNC milling machine high-speed cutting pin, can increase the smoothness, reduce the wear coefficient, reduce the number of tool changes, improve the efficiency of the machine tool, save the workpiece making time.
Cutting force is balanced, eliminating uneven feed, more conducive to processing.
Suitable for both medium and finish machining.
Features
Blue nano-coating, 75mm\100mm\150mm extended shank, extended cutting edge; mold steel universal, suitable for all high hardness materials below HRC65 degrees, for finishing. It belongs to high hardness tungsten steel milling cutter, which requires very high requirements on the whole process.
Processing materials.
Super hard mold steel, alloy steel, tool steel, ordinary steel, ductile cast iron, gray cast iron and other ferrous metals with hardness within HRC65 degrees.
Milling cutter to process products:
Plastic molds, hardware molds, die-casting molds, etc., automotive parts, hydraulic industry, automotive zero, electronics, medical, robotics, engineering machinery and so on.
Coating.
NACO nano-coating, can process high hardness material, good rigidity, high wear resistance, high machining accuracy.
Parameters
NO. | d-R | L1 | DH6 | L |
GEK-4R053350 | Φ3 R0.5 | 8 | Φ3 | 50 |
GEK-4R103350 | Φ3 R1 | 8 | Φ3 | 50 |
GEK-4R053450 | Φ3 R0.5 | 8 | Φ4 | 50 |
GEK-4R103450 | Φ3 R1 | 8 | Φ4 | 50 |
GEK-4R054450 | Φ4 R0.5 | 10 | Φ4 | 50 |
GEK-4R104450 | Φ4 R1 | 10 | Φ4 | 50 |
GEK-4R055550 | Φ5 R0.5 | 13 | Φ5 | 50 |
GEK-4R105550 | Φ5 R1 | 13 | Φ5 | 50 |
GEK-4R055650 | Φ5 R0.5 | 13 | Φ6 | 50 |
GEK-4R105650 | Φ5 R1 | 13 | Φ6 | 50 |
GEK-4R056650 | Φ6 R0.5 | 15 | Φ6 | 50 |
GEK-4R106650 | Φ6 R1 | 15 | Φ6 | 50 |
GEK-4R058860 | Φ8 R0.5 | 20 | Φ8 | 60 |
GEK-4R108860 | Φ8 R1 | 20 | Φ8 | 60 |
GEK-4R053375 | Φ3 R0.5 | 12 | Φ3 | 75 |
GEK-4R103375 | Φ3 R1 | 12 | Φ3 | 75 |
GEK-4R054475 | Φ4 R0.5 | 15 | Φ4 | 75 |
GEK-4R104475 | Φ4 R1 | 15 | Φ4 | 75 |
GEK-4R055575 | Φ5 R0.5 | 20 | Φ5 | 75 |
GEK-4R105575 | Φ5 R1 | 20 | Φ5 | 75 |
GEK-4R056675 | Φ6 R0.5 | 20 | Φ6 | 75 |
GEK-4R106675 | Φ6 R1 | 20 | Φ6 | 75 |
GEK-4R058875 | Φ8 R0.5 | 25 | Φ8 | 75 |
GEK-4R108875 | Φ8 R1 | 25 | Φ8 | 75 |
GEK-4R051075 | Φ10 R0.5 | 25 | Φ10 | 75 |
GEK-4R101075 | Φ10 R1 | 25 | Φ10 | 75 |
GEK-4R051275 | Φ12 R0.5 | 30 | Φ12 | 75 |
GEK-4R101275 | Φ12 R1 | 30 | Φ12 | 75 |
GEK-4R051480 | Φ14 R0.5 | 32 | Φ14 | 80 |
GEK-4R101480 | Φ14 R1 | 32 | Φ14 | 80 |
GEK-4R053100 | Φ3 R0.5 | 12 | Φ3 | 100 |
GEK-4R103100 | Φ3 R1 | 12 | Φ3 | 100 |
GEK-4R054100 | Φ4 R0.5 | 16 | Φ4 | 100 |
GEK-4R104100 | Φ4 R1 | 16 | Φ4 | 100 |
GEK-4R055100 | Φ5 R0.5 | 20 | Φ5 | 100 |
GEK-4R105100 | Φ5 R1 | 20 | Φ5 | 100 |
GEK-4R056100 | Φ6 R0.5 | 25 | Φ6 | 100 |
GEK-4R106100 | Φ6 R1 | 25 | Φ6 | 100 |
GEK-4R058100 | Φ8 R0.5 | 35 | Φ8 | 100 |
GEK-4R108100 | Φ8 R1 | 35 | Φ8 | 100 |
GEK-4R0510100 | Φ10 R0.5 | 40 | Φ10 | 100 |
GEK-4R1010100 | Φ10 R1 | 40 | Φ10 | 100 |
GEK-4R0512100 | Φ12 R0.5 | 45 | Φ12 | 100 |
GEK-4R1012100 | Φ12 R1 | 45 | Φ12 | 100 |
GEK-4R0514100 | Φ14 R0.5 | 45 | Φ14 | 100 |
GEK-4R1014100 | Φ14 R1 | 45 | Φ14 | 100 |
GEK-4R0516100 | Φ16 R0.5 | 45 | Φ16 | 100 |
GEK-4R1016100 | Φ16 R1 | 45 | Φ16 | 100 |
GEK-4R0518100 | Φ18 R0.5 | 45 | Φ18 | 100 |
GEK-4R1018100 | Φ18 R1 | 45 | Φ18 | 100 |
GEK-4R0520100 | Φ20 R0.5 | 45 | Φ20 | 100 |
GEK-4R1020100 | Φ20 R1 | 45 | Φ20 | 100 |
GEK-4R0525100 | Φ25 R0.5 | 45 | Φ25 | 100 |
GEK-4R1025100 | Φ25 R1 | 45 | Φ25 | 100 |
GEK-4R056150 | Φ6 R0.5 | 25 | Φ6 | 150 |
GEK-4R106150 | Φ6 R1 | 25 | Φ6 | 150 |
GEK-4R058150 | Φ8 R0.5 | 35 | Φ8 | 150 |
GEK-4R108150 | Φ8 R1 | 35 | Φ8 | 150 |
GEK-4R0510150 | Φ10 R0.5 | 45 | Φ10 | 150 |
GEK-4R1010150 | Φ10 R1 | 45 | Φ10 | 150 |
GEK-4R0512150 | Φ12 R0.5 | 45 | Φ12 | 150 |
GEK-4R1012150 | Φ12 R1 | 45 | Φ12 | 150 |
GEK-4R0514150 | Φ14 R0.5 | 45 | Φ14 | 150 |
GEK-4R1014150 | Φ14 R1 | 45 | Φ14 | 150 |
GEK-4R0516150 | Φ16 R0.5 | 50 | Φ16 | 150 |
GEK-4R1016150 | Φ16 R1 | 50 | Φ16 | 150 |
GEK-4R0518150 | Φ18 R0.5 | 50 | Φ18 | 150 |
GEK-4R1018150 | Φ18 R1 | 50 | Φ18 | 150 |
GEK-4R0520150 | Φ20 R0.5 | 55 | Φ20 | 150 |
GEK-4R1020150 | Φ20 R1 | 55 | Φ20 | 150 |
GEK-4R0525150 | Φ25 R0.5 | 60 | Φ25 | 150 |
GEK-4R1025150 | Φ25 R1 | 60 | Φ25 | 150 |
Introduction
Range of cutting edge diameter: D1-D25mm Range of full length: L=50-150mm
Fine-grained tungsten carbide parent material has high toughness and is covered with NACO nano-coating, which is wear-resistant.
Large-capacity chip removal, fast chip removal, not easy to stick to the knife to achieve high efficiency machining, workpiece high precision more glossy.
Dedicated to CNC milling machine high-speed cutting pin, can increase the smoothness, reduce the wear coefficient, reduce the number of tool changes, improve the efficiency of the machine tool, save the workpiece making time.
Cutting force is balanced, eliminating uneven feed, more conducive to processing.
Suitable for both medium and finish machining.
Features
Blue nano-coating, 75mm\100mm\150mm extended shank, extended cutting edge; mold steel universal, suitable for all high hardness materials below HRC65 degrees, for finishing. It belongs to high hardness tungsten steel milling cutter, which requires very high requirements on the whole process.
Processing materials.
Super hard mold steel, alloy steel, tool steel, ordinary steel, ductile cast iron, gray cast iron and other ferrous metals with hardness within HRC65 degrees.
Milling cutter to process products:
Plastic molds, hardware molds, die-casting molds, etc., automotive parts, hydraulic industry, automotive zero, electronics, medical, robotics, engineering machinery and so on.
Coating.
NACO nano-coating, can process high hardness material, good rigidity, high wear resistance, high machining accuracy.
Parameters
NO. | d-R | L1 | DH6 | L |
GEK-4R053350 | Φ3 R0.5 | 8 | Φ3 | 50 |
GEK-4R103350 | Φ3 R1 | 8 | Φ3 | 50 |
GEK-4R053450 | Φ3 R0.5 | 8 | Φ4 | 50 |
GEK-4R103450 | Φ3 R1 | 8 | Φ4 | 50 |
GEK-4R054450 | Φ4 R0.5 | 10 | Φ4 | 50 |
GEK-4R104450 | Φ4 R1 | 10 | Φ4 | 50 |
GEK-4R055550 | Φ5 R0.5 | 13 | Φ5 | 50 |
GEK-4R105550 | Φ5 R1 | 13 | Φ5 | 50 |
GEK-4R055650 | Φ5 R0.5 | 13 | Φ6 | 50 |
GEK-4R105650 | Φ5 R1 | 13 | Φ6 | 50 |
GEK-4R056650 | Φ6 R0.5 | 15 | Φ6 | 50 |
GEK-4R106650 | Φ6 R1 | 15 | Φ6 | 50 |
GEK-4R058860 | Φ8 R0.5 | 20 | Φ8 | 60 |
GEK-4R108860 | Φ8 R1 | 20 | Φ8 | 60 |
GEK-4R053375 | Φ3 R0.5 | 12 | Φ3 | 75 |
GEK-4R103375 | Φ3 R1 | 12 | Φ3 | 75 |
GEK-4R054475 | Φ4 R0.5 | 15 | Φ4 | 75 |
GEK-4R104475 | Φ4 R1 | 15 | Φ4 | 75 |
GEK-4R055575 | Φ5 R0.5 | 20 | Φ5 | 75 |
GEK-4R105575 | Φ5 R1 | 20 | Φ5 | 75 |
GEK-4R056675 | Φ6 R0.5 | 20 | Φ6 | 75 |
GEK-4R106675 | Φ6 R1 | 20 | Φ6 | 75 |
GEK-4R058875 | Φ8 R0.5 | 25 | Φ8 | 75 |
GEK-4R108875 | Φ8 R1 | 25 | Φ8 | 75 |
GEK-4R051075 | Φ10 R0.5 | 25 | Φ10 | 75 |
GEK-4R101075 | Φ10 R1 | 25 | Φ10 | 75 |
GEK-4R051275 | Φ12 R0.5 | 30 | Φ12 | 75 |
GEK-4R101275 | Φ12 R1 | 30 | Φ12 | 75 |
GEK-4R051480 | Φ14 R0.5 | 32 | Φ14 | 80 |
GEK-4R101480 | Φ14 R1 | 32 | Φ14 | 80 |
GEK-4R053100 | Φ3 R0.5 | 12 | Φ3 | 100 |
GEK-4R103100 | Φ3 R1 | 12 | Φ3 | 100 |
GEK-4R054100 | Φ4 R0.5 | 16 | Φ4 | 100 |
GEK-4R104100 | Φ4 R1 | 16 | Φ4 | 100 |
GEK-4R055100 | Φ5 R0.5 | 20 | Φ5 | 100 |
GEK-4R105100 | Φ5 R1 | 20 | Φ5 | 100 |
GEK-4R056100 | Φ6 R0.5 | 25 | Φ6 | 100 |
GEK-4R106100 | Φ6 R1 | 25 | Φ6 | 100 |
GEK-4R058100 | Φ8 R0.5 | 35 | Φ8 | 100 |
GEK-4R108100 | Φ8 R1 | 35 | Φ8 | 100 |
GEK-4R0510100 | Φ10 R0.5 | 40 | Φ10 | 100 |
GEK-4R1010100 | Φ10 R1 | 40 | Φ10 | 100 |
GEK-4R0512100 | Φ12 R0.5 | 45 | Φ12 | 100 |
GEK-4R1012100 | Φ12 R1 | 45 | Φ12 | 100 |
GEK-4R0514100 | Φ14 R0.5 | 45 | Φ14 | 100 |
GEK-4R1014100 | Φ14 R1 | 45 | Φ14 | 100 |
GEK-4R0516100 | Φ16 R0.5 | 45 | Φ16 | 100 |
GEK-4R1016100 | Φ16 R1 | 45 | Φ16 | 100 |
GEK-4R0518100 | Φ18 R0.5 | 45 | Φ18 | 100 |
GEK-4R1018100 | Φ18 R1 | 45 | Φ18 | 100 |
GEK-4R0520100 | Φ20 R0.5 | 45 | Φ20 | 100 |
GEK-4R1020100 | Φ20 R1 | 45 | Φ20 | 100 |
GEK-4R0525100 | Φ25 R0.5 | 45 | Φ25 | 100 |
GEK-4R1025100 | Φ25 R1 | 45 | Φ25 | 100 |
GEK-4R056150 | Φ6 R0.5 | 25 | Φ6 | 150 |
GEK-4R106150 | Φ6 R1 | 25 | Φ6 | 150 |
GEK-4R058150 | Φ8 R0.5 | 35 | Φ8 | 150 |
GEK-4R108150 | Φ8 R1 | 35 | Φ8 | 150 |
GEK-4R0510150 | Φ10 R0.5 | 45 | Φ10 | 150 |
GEK-4R1010150 | Φ10 R1 | 45 | Φ10 | 150 |
GEK-4R0512150 | Φ12 R0.5 | 45 | Φ12 | 150 |
GEK-4R1012150 | Φ12 R1 | 45 | Φ12 | 150 |
GEK-4R0514150 | Φ14 R0.5 | 45 | Φ14 | 150 |
GEK-4R1014150 | Φ14 R1 | 45 | Φ14 | 150 |
GEK-4R0516150 | Φ16 R0.5 | 50 | Φ16 | 150 |
GEK-4R1016150 | Φ16 R1 | 50 | Φ16 | 150 |
GEK-4R0518150 | Φ18 R0.5 | 50 | Φ18 | 150 |
GEK-4R1018150 | Φ18 R1 | 50 | Φ18 | 150 |
GEK-4R0520150 | Φ20 R0.5 | 55 | Φ20 | 150 |
GEK-4R1020150 | Φ20 R1 | 55 | Φ20 | 150 |
GEK-4R0525150 | Φ25 R0.5 | 60 | Φ25 | 150 |
GEK-4R1025150 | Φ25 R1 | 60 | Φ25 | 150 |
Metalloobrabotka is an internationally renowned trade fair for metalworking and machine tool industries, held annually since 1984 at the Expocentre exhibition center in Moscow, Russia. Expocentre boasts modern and well-equipped facilities, providing an ideal venue for this event. Organized by Russia
GEEFUN booth - Hall 2.5-25C63 2024 METALLOOBRABOTKATIME/MAY 20-24,2024 ADD/EXPOCENTRE FAIRGROUNDS,MOSCOW,RUSSIABOOTH NO /25C63Our team of experts is here to help you find the perfect tools for your business needs. The exhibition is in full swing, looking forward to meeting you at the booth!
Dear customers,Due to the Spring Festival holiday, our company will be on holiday from February 5 to February 20, 2024.It will officially resume work on February 21, 2024.If you have any urgent matters during this period, please send an email. We will get back to you as soon as possible.Thank you fo
In aerospace machining, where materials like titanium and other high-strength alloys are common, milling cutters play a crucial role in shaping and finishing components. Machining parameters should be carefully selected based on the material being cut. Sturdy tool setups and stable machining conditi
Carbide roughened milling cutter is a cutting tool, usually made of hard carbide material, used to remove excess material from a workpiece to obtain the desired shape and size.Designed for efficient roughing tasks, this type of tool typically has a cutting edge with multiple teeth, each with a speci
A thread milling cutter is a tool for cutting threads through milling. In the past, the traditional thread processing method was usually through taps, etc. With the continuous development and progress of CNC technology, more advanced thread milling cutter processing methods have emerged. It has exce
Carbide center drill is a cutting tool commonly used in the field of metal processing. It is widely used in the processing process for its high hardness, wear resistance and good cutting performance. Carbide material: The main component material of the carbide center drill bit is cemented carbide, a
In early December, our company participated in the 2023 Indonesia Machine Tool Exhibition held in Jakarta, Indonesia. As an enterprise committed to innovative technology and manufacturing development, we participated in this event to discuss future opportunities in the manufacturing industry with i
In modern manufacturing, efficient cutting tools are an important part of the production process. Tungsten steel long neck milling cutter, as a cutting tool, plays a key role in various fields. Its material and design features make it an indispensable tool in the process industry. Tungsten steel lon
Reamers are intricately designed cutting tools used to precisely trim, enlarge, or shape holes. It has important applications in woodworking, metal processing, medical surgery and other fields.1. Flute design and shapeThe shape of the cutting edge is crucial to the cutting process. The cutting edge
Carbide step drill bit is a tool that plays a vital role in the cutting and machining fields. Its excellent performance and versatility make it widely used in multiple application fields. The reason why carbide step drills are so important is that they combine the high hardness and wear resistance o
Changzhou Xute Jifeng Tools is one of the suppliers that provide comprehensive metal cutting solutions for milling, drilling, hole processing, thread processing, etc.
Changzhou Xute Jifeng Tools Group Co., Ltd. participated in the exhibition МЕТАЛЛООБРАБОТКА-2023 in Moscow on May 22-26, 2023. The booth number is 71A10.!
In June, European and Asian customers came to our company for factory inspection and guidance, forming a lasting partnership.
High-speed steel (HSS) and carbide are common tool materials that play a key role in many fields such as manufacturing, aerospace, automotive industry, construction industry, mining, medical field and electronics industry due to their excellent properties . Their superior performance and durability
The milling cutter is a multi-edged tool. The total length of the cutting edges involved in cutting is longer. There is no idle stroke during cutting, and higher cutting speeds can be used. When ordinary end mills are milling stainless steel, depending on the actual use conditions at the production
Carbide milling cutter is one of the essential tools in the milling center. It comes in various types and is used for metal processing. According to the processing requirements and the type of workpiece, it can be used for rough machining, intermediate machining and finishing machining.When the mach
Aluminum alloy is an important material widely used in manufacturing and other fields. Thanks to its light weight, high strength, corrosion resistance and recyclability, it has become indispensable in modern manufacturing and engineering fields. One of the materials. The use of aluminum alloys is in
A tapered ball nose end mill is a cutting tool used in machining and milling applications. It is similar to a regular ball nose end mill but has a tapered design. The key features of a tapered ball nose end mill include: Tapered Shape: As the name suggests, the cutting end of the tool has a tapered
As we all know, stainless steel is an alloy material with extremely excellent chemical and physical properties, making it one of the indispensable and important materials in the engineering and manufacturing fields. It has many properties: corrosion resistance, high temperature resistance, mechanica
Building 6-5, No 200 Da tong west road, Niutang Town,Wujin District, Changzhou,Jiangsu,China